Innoprotect B580® Protector 250 ml
EAN: 7434947439488
| Manufacturer | Model | Start Year | End Year |
|---|
Content Cleaner
Innosoft B570® is a special deep cleaner that removes oxides c.q. rust from stainless steel. Innosoft B570® is a white viscose liquid based on organic acids and surfactants without abrasives with a pH of 3.It is suitable for intensive cleaning of contaminated surfaces such as fly rust and other rusty spots also called tea stains. Innosoft B570® iis gentle to metal but very hard against oxides and dirt, it is definitely not a mordant and thus does not affect the oxide skin of the metal. In combination with Innoprotect B580® corrosion is prevented as much as possible in the future. The Innosoft B570 is a powerful depth cleaner for various deposits and rust. The Innoprotect B580 serves for periodic maintenance for light soiling.
User Instruction
- Shake Innosoft B570® well before use
- Apply the cleaner undiluted with a damp sponge or cloth. Then let it soak in for about 1 minute and then polish with some pressure with a sponge or cloth over the material to be cleaned.
- Polish or polish when using the (scouring) sponge or cloth in the rolling direction of the material or in the direction of the brushed, sanded or ground surface. If the rust or dirt is stubborn, you can use the sanding side of the sponge.
- Keep in mind that the loosened oxides may slightly damage the surface. Therefore, be especially careful with polished surfaces.
- Carefully remove the residues with water or a damp cloth. Polish or polish away the residues with light pressure to avoid rubbing the dirt back into the pores of the metal.
- Use the neutral cleaner Innoprotect B580® which, in addition to intensive cleaning and neutralization, also leaves a nanolayer to prevent new corrosion as much as possible.
- Do not allow Innosoft B570® to come into contact with natural stone.
- Do not use the products in full sunlight.
Contents Protector
Innoprotect B580® is a transparent cleaner that provides increased protection on stainless steel and aluminum surfaces. It provides additional resistance to weathering, oxidation, fly rust and atmospheric contamination. Innoprotect B580® is a protective agent to provide additional protection of the surface against new corrosion after cleaning with Innosoft B570®. Innoprotect B580® puts a thin protective layer which protects against new corrosion.
User instruction
- Dilute 400 ml Innoprotect B580® with 1 liter of water for cleaning and post-treatment of surfaces after treatment with Innosoft B570®.
- Dilute 50 ml with 1 liter of water for daily use.
- Apply Innoprotect B580® with a sponge or cloth
- Rinse with water (best is demineralized water) for a nice dry result.
- Always use cold water.
